ERP Consultant Career: Reference Request Timing

Insights
ERP consultant preparing a reference request at a desk

An erp consultant career is easier to protect when you ask for references before the work fades from memory. Most consultants ask at the single worst moment: after they have already rolled off.

You know how it goes. Project is closing, inbox is a mess, you are onboarding your replacement, and someone in staffing is asking for your next availability date. That is when you remember you should probably “use the client as a reference.” So you send the vague, polite email.

“Hey, it was great working with you. Would it be OK if I used you as a reference in the future?”

They reply “Of course.” You feel covered. You are not.

Six months later, a new prospect calls them. They vaguely remember you were “good,” you “worked hard,” and you “helped with testing or something.” You get a generic, forgettable reference. In a competitive erp consultant career, that kind of reference is the same as no reference at all.

The obvious approach fails for three reasons. You ask too late, when details are gone. You ask too vaguely, so they do not know what to say. And you put all the work on them, when they are already moving on to the next release, the next S/4HANA wave, the next fire drill.

The result is a reference that does nothing to protect an erp consultant career built on hard, specific wins. If you are serious about an erp consultant career that survives rate compression and vendor churn, you cannot let your best projects fade into vague compliments.

ERP consultant career: the tactic

The tactic has three parts: timing, framing, and the draft.

1. Timing: Days 28 to 25

Do not wait for project close. Ask while people still see you doing the thing they might later describe.

On long programs, Day 28 is not literal. It is “the last 2 to 3 weeks of your current phase, before hypercare chaos.” You are visible, your impact is fresh, and everyone is still in meeting mode.

Pick two or three people: your direct manager, a business lead who benefited from your work, and, if possible, one senior stakeholder. If you are in an internal role, the same logic applies. Catch them before release cutover, while their calendar is not fully hijacked.

This is how you protect an erp consultant career from the “who was that again” problem.

A practical way to hit this timing is to anchor it to milestones already in your calendar. When you see “UAT exit,” “retrofit signoff,” or “final payroll rehearsal,” start lining up references.

Block a 30 minute window labelled “reference setup” so it does not get eaten by last minute defect triage. List your 2 or 3 target people, draft the language for each, and send or schedule the outreach. Treat it like a deliverable, not a chore you will get to when things calm down. Things never calm down.

“Days 28 to 25” looks different depending on your role. For an independent on short advisory pieces, it might literally be the final week. On a multi-year S/4 or Oracle Cloud program, it might be the last sprint of a release train.

The mechanic is the same. Find the point where stakeholders can see the result but have not mentally moved on, then work backwards 2 to 3 weeks. Repeating that habit turns an erp consultant career from disconnected gigs into a compounding story you can manage.

2. Framing: specific, low effort, future facing

Your ask is not “Can I use you as a reference.” It sounds like this:

> “I have really enjoyed working with you on this phase. In about a month I will be looking at my next assignment. Would you be comfortable serving as a reference, specifically for the way we handled [stream or outcome] together? I can send a short summary of what we delivered, to make it easy.”

Notice the pieces:
– You anchor to a concrete outcome or workstream.
– You tie it to your next project, not some vague future.
– You pre-offer help so it feels like a 5 minute favor, not homework.

Someone who thinks about their erp consultant career like an asset will make this kind of ask routine at each successful phase. Framing it this way is a small move, but multiplied across years, it changes the texture of your erp consultant career from “vague good reputation” to “documented track record of specific outcomes.”

Edge cases in the response matter. If they say, “I am happy to be an internal reference, but I cannot speak externally,” take the win and clarify how staffing or your firm can use it.

If they hesitate or say, “Let us see after go live,” do not push. Say, “Completely fair, let us revisit once we are stable,” then double down on delivery. A cautious stakeholder before cutover often becomes enthusiastic once production behaves. Give them an easy out, protect the relationship, and leave the door open. Forcing a reference today is never worth burning political capital that could pay off twice in a 20 year erp consultant career.

3. The draft: the counter‑intuitive move

If they say yes, follow quickly with an email:

> “Thanks for agreeing. To save you time, I drafted a possible reference note that captures what we did. Feel free to edit or ignore. I just wanted to make it easy.”

Then you write three tight bullets that sound like them, in their language:
– The business context.
– What was broken.
– What changed after your work.

That draft is what turns “Yeah, they were good” into a specific story a future client can trust. Over and over, this specificity is what quietly upgrades an erp consultant career from “another resource” to “the person who solved X for us.”

Putting it to work

Here is how this looks in real project life.

Scenario 1: Big SI, SAP S/4HANA program

You are the OTC lead on a 14‑month S/4 rollout. Three weeks before integration testing wraps, you ping your stream lead on Teams:

> “We are closing out OTC for this phase. In about a month I will be looking at my next assignment. Would you be comfortable being a reference, specifically for the way we handled order‑to‑cash design and cutover together? I can send you a quick summary so it is easy.”

They say yes. Same day, you send:

  • One slide with before / after OTC process, similar to what you would show in a digital transformation steering deck.
  • A short drafted reference:

> “On our S/4HANA program, [Your Name] picked up a complex OTC scope mid‑flight, stabilized design, and unblocked key decisions with Sales and Finance. They led mock cutovers that surfaced data issues early, which protected go‑live.”

You just made it easy for them to say yes again when a future client calls about your erp consultant career, and that one reference can quietly open three or four doors later in the same erp consultant career.

Scenario 2: Functional SME in a niche platform

You are a PeopleSoft functional consultant finishing a tricky retro‑pay fix. Week 10, you talk to the payroll manager:

> “Once we clear this retro‑pay cycle, I will be planning my next project. Would you be open to serving as a reference, specifically on how we stabilized payroll and reduced manual work? I can send you a short recap.”

They agree. You send bullets that mirror how you would explain your work in a status meeting, the way you might in a “what does a functional actually do” discussion like this one.

Later, when a CIO grills them about you, they talk about cycle time, defects, and risk reduction, not “they were nice to work with.” That detail compounds over an erp consultant career.

Quick checklist you can reuse

Use this in your notebook or OneNote:

  • [ ] Identify 2‑3 people per phase.
  • [ ] Ask between Days 28‑25 of the phase.

Run this checklist a few dozen times and you will feel the difference in how secure your erp consultant career feels between projects.

The bottom line

References are not a courtesy, they are infrastructure. If you treat them as an afterthought, you get afterthought results.

Ask early, while the work is fresh. Aim the reference at a specific outcome. Do the hard part yourself by drafting what you want them to be able to say. That is how you turn “Yeah, they were solid on our S/4 program” into a concrete story about risk reduced, defects avoided, and value delivered.

Across an erp consultant career, those stories become an asset you can redeploy. When a prospect calls, your past client is not guessing. They are reading off a script you helped them write.

In a market that keeps getting more complex, from S/4 conversions to “talk to your system” futures like this one, that specificity separates you from the next CV in the stack. Consultants who manage this part of an erp consultant career sleep better during gaps because they know what their references will say.

If you want the exact wording, including how to handle “I am not sure I can be a reference” and how this fits with other moves that protect an erp consultant career, it is all laid out in Chapter 11 of Never on the Bench. The complete scripts, and the surrounding context, are in that chapter.

Sources

For official guidance related to this article:

  • SAP — official guidance and updates